1. product introduction

universal hydraulic baler is suitable for straw branches, forage grass, waste paper packaging, cotton packaging, clothing packaging, straw packaging, plastic packaging medicine packaging, wool packaging, recyclable garbage packaging, can also be applied to cotton, wool, waste paper boxes, waste cardboard, yarn, tobacco leaves, plastics, peppers, cloth, woven bags, knitted velvet, hemp, sacks, wool, wool balls, cocoons, silk, hops, waste plastic bags and other light foam, iron wire, copper, aluminum wire loose materials and other soft materials are compressed and packed to greatly reduce volume, increase density, and facilitate transportation and storage. It is a powerful helper for comprehensive utilization and development of biomass energy.

2. structure principle:

hydraulic packer includes a bracket with a bottom plate and front and rear side baffles. jacks are installed on the bracket, the jacks are equipped with piston rods, the right end of the piston rods is connected with a vertical pusher plate, the right side of the pusher plate is connected with a pusher plate, and the gap between adjacent pusher plates is a rope-passing groove on the plate; the brackets on the right side of the front and rear side baffles are respectively fixedly connected with front and rear side baffles, and the gap between adjacent side baffles is a rope threading port; the right end of the bracket is provided with a discharge port, the right end of the bracket at the discharge port is hinged with a door panel, the left side of the door panel is connected with a door slat, and the gap between adjacent door slat is a rope threading groove on the door; the front and rear side baffle, the cavity enclosed by the front and rear side blocking bars, the upper blocking plate for pressing material, the door panel and the bottom plate is an extrusion cavity; the door panel and the right end of the bracket are fixedly connected with a locking device. And according to the need to adjust the size of the package within a certain range.

hydraulic baler as a new type of environmental protection equipment, its application in the market is also more and more, and with the development of economy, the production of hydraulic baler manufacturers are gradually increasing, today's small series mainly for everyone to analyze the characteristics of hydraulic baler is what, hoping to help you better understand the hydraulic baler this product hydraulic baler characteristics? Hydraulic baler is mainly used in steel mills, crop straw, recycling processing industry and non-ferrous, ferrous metal smelting industry. Hydraulic baler has many characteristics. Hydraulic baler can extrude various metal scraps (steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel and scrap automobile scrap, etc.) into cuboid, octagonal body, cylinder and other qualified furnace materials in various shapes, which can reduce transportation and smelting costs and improve furnace throwing speed.

type hydraulic baler main features

1. Hydraulic compaction, manual loading, manual button operation

2. Fully maintain the physical characteristics of the material

3. The waste compaction ratio can reach 5:1

4. Two binding channels, easy to operate

5. Anti-rebound barb, maintain the compression effect

6. The pressure plate is automatically homed